Hover to zoom
Max 20W Q-switched Pulse Fiber Laser - DIY Metal Engraving Tool
- High reliability: All optical fiber, no space optics,
- Fine marking:The beam quality is good, the pulse width is small, and the marking pattern is more delicate.
- Easy to integrate:The volume is reduced by 67%, and the weight is reduced by 50%, making it easier to integrate equipment.
- Intelligent control:The built-in cooling fan can intelligently adjust the wind speed, which is convenient for energy saving.
- Sealed structure: Fully sealed structure is used to prevent dust and moisture, ensuring long-term operation of the machine.
- Model
- Max 20W 30W 50W Q-switched Pulse Fiber Laser Source
- Model Number
- Max 20W 30W 50W Q-switched Pulse Fiber Laser Source
- Certification
- CE;CE
- Origin
- Mainland China
- Brand Name
- OEMG
- operating syste
- EZCAD2
Reply within 24 hours · 12-month warranty
Max 20W 30W 50W Q-switched Pulse Fiber Laser Marking Machine Source GQM 1064nm for DIY Metal Engraving Tool
Quality:
Model:20W>20L>20X
Model:30W>30L>30X
Model:50W>50X
Customer can choose suitable model to buy based your general budget.
Features:
1.High reliability: All optical fiber, no space optics,
2.Fine marking:The beam quality is good, the pulse width is small, and the marking pattern is more delicate.
3.Easy to integrate:The volume is reduced by 67%, and the weight is reduced by 50%, making it easier to integrate equipment.
4.Intelligent control:The built-in cooling fan can intelligently adjust the wind speed, which is convenient for energy saving.
5.Sealed structure: Fully sealed structure is used to prevent dust and moisture, ensuring long-term operation of the machine.
Q-Switched Pulsed Fiber Laser Series are maintenance-free fiber lasers based on the Q-switched technology and MOPFA. These lasers deliver light centered at 1064nm and guided to the work piece via a flexible metal-sheathed fiber cable. It provides a set of pulse durations, repetition rates and peak powers. The optical head may be equipped with an opto-isolator, that makes it possible to mark directly on non-metallic materials (plastic, wood, paper, etc.) and some metal with low reflectivity.
• High beam quality fiber output.
• Superior reliability, long lifetime.
• No shadow or virtual open circuit phenomenon when processing on special materials.
• Universal DB-25 interface.
Technical Parameters
| NO. | Characteristics | Test Conditions | Min. | Typical | Max. | Unit |
| 1 | Mode | Pulse | ||||
| 2 | Polarization | Random | ||||
| 3 | Beam Quality M⊃2; | Pout=Pnom | 1.1 | 1.3 | 1.6 | |
| 4 | Center Wavelength | Pout=Pnom | 1055 | 1064 | 1070 | nm |
| 5 | Spectrum Width(3dB) | Pout=Pnom | 5 | 10 | nm | |
| 6 | Average Optical Power(Pnom) | MFP-5W | 4.5 | 5 | 5.5 | W |
| MFP-10W | 9.5 | 10 | 10.5 | W | ||
| MFP-20W | 19.5 | 20 | 20.5 | W | ||
| MFP-30W | 29.5 | 30 | 30.5 | W | ||
| MFP-50W | 49 | 50 | 51 | W | ||
| 7 | Power | Range | 10 | 100 | % | |
| 8 | Single Pules Energy | MFP-5W | 0.45 | mJ | ||
| MFP-10W | 0.56 | mJ | ||||
| MFP-20W | 0.67 | mJ | ||||
| MFP-30W | 1 | mJ | ||||
| MFP-50W | 1 | mJ | ||||
| 9 | Optical Pulse Width(FWHM) | 90 | 100 | 110 | ns | |
| 10 | Pulse Repetition Frequency (PRF.) | MFP-5W | 10 | 30 | KHz | |
| MFP-10W | 22 | 50 | KHz | |||
| MFP-20W | 30 | 60 | KHz | |||
| MFP-30W | 30 | 60 | KHz | |||
| MFP-50W | 50 | 80 | KHz | |||
| 11 | Output Power Stability | Pout=Pnom | 5 | % | ||
| 12 | Beam Diameter | 1/e2 | 6 | 7.5 | 9 | mm |
| 13 | Beam Ellipticity | 90 | % | |||
| Brand Name | OEMG |
|---|---|
| Certification | CE;CE |
| Model | Max 20W 30W 50W Q-switched Pulse Fiber Laser Source |
| Model Number | Max 20W 30W 50W Q-switched Pulse Fiber Laser Source |
| operating syste | EZCAD2 |
| Origin | Mainland China |
Send Us an Inquiry
Tell us your requirements — wire range, output target, voltage or customization needs — and our engineers will recommend the right machine for your line.
- Factory-direct pricing
- Reply within 24 hours
- OEM / ODM supported
- 12-month warranty
