Hover to zoom
CNC 3040 Metal Router - USB LTP 2in1 Engraver 4 Axis 2200W Mach3
- Mach3 Controller Tool Kit The CNC router is suitble for Industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby...
- Industrial or Hobby Prototype Building, Building Model Making, PCB, Advertising Signs, Artwork, Crafts, Aircraft Models, RC Model parts, etc.
- So, you can do engraving work at office or home.
- Model
- CNC Router 3040
- Model Number
- CNC Router 3040
- Certification
- CE
- Origin
- Mainland China
- axis
- 4axis
- CNC or Not
- CNC
Reply within 24 hours · 12-month warranty
CNC 3040 Metal Router Machine Sink USB LTP 2 in 1 Engraver Milling Cutter 4 Axis 2200W for Woodworking Mach3 Controller Tool Kit
Introduction
The CNC router is suitble for Industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.
The cnc router is designedfor large area engraving work such as Industrial or Hobby Prototype Building, Building Model Making, PCB, Advertising Signs, Artwork, Crafts, Aircraft Models, RC Model parts, etc. So, you can do engraving work at office or home.
| MODEL | CNC 3040 | |||
| Acceptable material thickness | 120mm | |||
| Toolauto-checking | Yes | |||
| Spindle Motor: | 2200W | |||
| Type of screw | 1605 Ball screw | |||
| Weigh | 55KG | |||
| Machine Dimensions： | 660X570X450mm | |||
| Rack material： | 6061 and 6063 Hard aluminum alloy (The unique and dedicated mold extrusion profiles, Let counterfeiters dwarfs.) | |||
| Engraving area： | 300X400mm | |||
| Z-Axis Stroke： | 60mm, Engraving depth depends on the length of the tool edge | |||
| Acceptable material thickness： | 120mm | |||
| Rail type： | Chromeplate shaft+Linear Bearings,Surface hardening 61HRC | |||
| Spindle motor： | 2200W VFD water cooling spindle | |||
| Collet type： | ER16 Collet | |||
| Stepper motor and drive： | two-phase hybrid stepping motor3A/PHASE,150N.cm, 8 segments drive. | |||
| Maximum operating speed： | 4000mm/min (Engraving speed :300-3000mm/min) | |||
| Repeat positioning Accuracy： | ≤0.03mm | |||
| Software Compatability： | Mach3/Emc2/Kcam, (Type3,Wentai, ArtCAM,coppercam) | |||
| Command code： | G code/.nc/.ncc/.tab/.txt | |||
Rotation Axis (4th Axis) Description: | Chuck Size: 50mm self-centering chuck Center height: H = 51mm Clamping diameter: 50mm or less Deceleration mode: synchronous wheel / belt Deceleration ratio: 4:1 Stepper motor:NEW 57 type / 3A Stepper Drive: T65-axis drive Positioning accuracy: 0.075 ° Weight: 4kg | |||
Sink Height is about 10CM
| axis | 4axis |
|---|---|
| Certification | CE |
| CNC or Not | CNC |
| Condition | New |
| Is Smart Device | no |
| Model | CNC Router 3040 |
| Model Number | CNC Router 3040 |
| Origin | Mainland China |
| Repeat positioning Accuracy | less than 0.01mm |
| Spindle | water cooled spindle 2200W |
| Type of screw | 1605 Ball screw |
| water tank | standard |
Send Us an Inquiry
Tell us your requirements — wire range, output target, voltage or customization needs — and our engineers will recommend the right machine for your line.
- Factory-direct pricing
- Reply within 24 hours
- OEM / ODM supported
- 12-month warranty
