Hover to zoom
Mach3 Mini CNC 3040 3Axis 1500W - USB LTP 2in1 Metal PCB Engraver
- Woodworking Z Stroke 60mm The CNC router is suitble for Industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby...
- Industrial or Hobby Prototype Building, Building Model Making, PCB, Advertising Signs, Artwork, Crafts, Aircraft Models, RC Model parts, etc.
- So, you can do engraving work at office or home.
- Model
- CNC Router 3040
- Model Number
- CNC Router 3040
- Certification
- CE
- Origin
- Mainland China
- axis
- 3axis
- CNC or Not
- CNC
Reply within 24 hours · 12-month warranty
Mach3 Controller Mini CNC 3040 3Axis 1500W USB LTP 2 in 1 Metal PCB Engraving Machine Wood Router for Woodworking Z Stroke 60mm
Introduction
The CNC router is suitble for Industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.
The cnc router is designedfor large area engraving work such as Industrial or Hobby Prototype Building, Building Model Making, PCB, Advertising Signs, Artwork, Crafts, Aircraft Models, RC Model parts, etc. So, you can do engraving work at office or home.
| MODEL | CNC 3040 |
| Spindle Motor: | 1500W |
| Type of screw | 1605 Ball screw |
| Weigh | 37KG |
| Machine Dimensions： | 660X570X450mm |
| Rack material： | 6061 and 6063 Hard aluminum alloy (The unique and dedicated mold extrusion profiles, Let counterfeiters dwarfs.) |
| Engraving area： | 300X400mm |
| Z-Axis Stroke： | 60mm, Engraving depth depends on the length of the tool edge |
| Acceptable material thickness： | 60mm |
| Rail type： | Chromeplate shaft+Linear Bearings,Surface hardening 61HRC |
| Spindle motor： | 1500W VFD water cooling spindle |
| Collet type： | ER11 Collet |
| Stepper motor and drive： | two-phase hybrid stepping motor3A/PHASE,150N.cm, 8 segments drive. |
| Maximum operating speed： | 4000mm/min (Engraving speed :300-3000mm/min) |
| Repeat positioning Accuracy： | ≤0.03mm |
| Software Compatability： | Mach3/Emc2/Kcam, (Type3,Wentai, ArtCAM,coppercam) |
| Command code： | G code/.nc/.ncc/.tab/.txt |
| axis | 3axis |
|---|---|
| Certification | CE |
| CNC or Not | CNC |
| Condition | New |
| Is Smart Device | no |
| Model | CNC Router 3040 |
| Model Number | CNC Router 3040 |
| Origin | Mainland China |
| Repeat positioning Accuracy | less than 0.01mm |
| Spindle | water cooled spindle 1500W |
| Type of screw | 1605 Ball screw |
Send Us an Inquiry
Tell us your requirements — wire range, output target, voltage or customization needs — and our engineers will recommend the right machine for your line.
- Factory-direct pricing
- Reply within 24 hours
- OEM / ODM supported
- 12-month warranty
