Hover to zoom
Nema 17 Stepper Motor 17HS08-1004S - 4-Lead Hybrid Micro Stepping for CNC/3D Printer
- Resitance Accuracy: 士10% Inductance Accuracy: +20% Temperatru Rise: 80"C Max Ambient Temperatuar: -20C ~+50C Insulation Resistance: 100MQMin.
- VDC Dielectric Strength: 500VAC for one minute Max.
- N Max, axial force : 10N Motor coil It adopts pure copper enameled wire and fully automated winding machine technology.
- Model
- 17HS08-1004S
- Model Number
- 17HS08-1004S
- Driving voltage
- 12 or 24V
- Certification
- CE;CE
- Application
- 3D printers;Reprap project;CNC machine
- Warranty
- 1 Year
Reply within 24 hours · 12-month warranty
Nema 17 Stepper Motor Nema17 Step Motor 4-Lead 17HS08-1004S Motor for CNC Extruder 3D Printer Motor
Specification
Manufacturer Part Number: 17HS08-1004S
Motor Type: Bipolar Stepper
Step Angle: 1.8 deg
Step Angle Accuracy: 土5%
Resitance Accuracy: 士10%
Inductance Accuracy: +20%
Temperatru Rise: 80"C Max
Ambient Temperatuar: -20C ~+50C
Insulation Resistance: 100MQMin. .500VDC
Dielectric Strength: 500VAC for one minute
Shaft Radial Play: 0.02Max. (450g-load)
Shaft Axial Play: 0.08Max. (450g-load)
Max.radial force: 28N
Max, axial force : 10N
Motor coil
It adopts pure copper enameled wire and fully automated winding machine technology.
The copper wires are evenly arranged to reduce the temperature rise of the motor
Ensure that it is not easy to deform during long-term transportation
Reduce noise
Silicon steel rotor
Imported silicon steel bearings are used, and the surface is coated with imported epoxy resin
Seal the rotor as a whole and cure it at high temperature
It is not easy to leave iron filings in the tooth slots after grinding the excircle
Reduce the risk of jamming, more stable output and longer service life
| Application | 3D printers;Reprap project;CNC machine |
|---|---|
| Certification | CE;CE |
| Current / Phase | 1.0A |
| Driving voltage | 12 or 24V |
| Gear Ratio | 5:1 |
| Holding Torque | 0.13N.m |
| Model | 17HS08-1004S |
| Model Number | 17HS08-1004S |
| Origin | Mainland China |
| Phase | 2 |
| Shaft length | 18mm (excluding steps) D-type shaft |
| Step Angle(degrees) | 1.8degree |
| Type | HYBRID |
| Warranty | 1 Year |
Send Us an Inquiry
Tell us your requirements — wire range, output target, voltage or customization needs — and our engineers will recommend the right machine for your line.
- Factory-direct pricing
- Reply within 24 hours
- OEM / ODM supported
- 12-month warranty
