Hover to zoom
RichAuto DSP A11S CNC Controller - 3 Axis Motion Remote, English Version
- This is the original brand : RichAuto
- DSP controller for cnc router,USB connect,can be use without computer.
- A11E/A11S the same as 0501. The function have improve, use in the same way.
- A11E/A11S have replaced 0501 from 2015.
- We have set up the English version before delivery.
- Manual and software can be sent by mail.
- Model Number
- CNC DSP A11S;CNC DSP A11S
- Certification
- CE
- Application
- Milling Machine
- Origin
- Mainland China
- Communication Port
- U disk / USB cable
- Control Signal
- differential signal
Reply within 24 hours · 12-month warranty
RichAuto DSP A11S CNC Controller A11E A11C 3 Axis Motion Remote Controller For CNC Engraving Cutting English Version
Introduction
1. This is the original brand : RichAuto
2. DSP controller for cnc router,USB connect,can be use without computer.
3. Suitable for 3 axis.
4. A11E/A11S the same as 0501. The function have improve, use in the same way.
5. A11E/A11S have replaced 0501 from 2015.
6. We have set up the English version before delivery.
7. Manual and software can be sent by mail.
Paremeter
| Product Model | RichAuto DSP A11 |
| CPU | DSP |
| Internal Memory | 512MB |
| Display Screen | 128*64 Monochrome LCD |
| Communication Port | U disk / USB cable |
| Controlled Axis Number | 3 axes |
| Control Signal | differential signal |
| Drive System | step motor/servo motor |
| Min.Input Unit | 0.001mm |
| No Volt Protection | support |
| Breakpoint Processing Function | 8 |
| External Power Supply Voltage | 24V DC |
| Manual Mode | Continuous/point move/distance |
| Interpolation Way | line/arc |
| Soft/Hard Limit | support |
| Max. Pulse Frequency | 1M/S |
| Password Protection | support |
| Support Language | simple Chinese/traditional Chinese/English |
| /other languages | |
| Standard Configuration | (1) DSP Handle (1) 50 core cable |
| (1)USB cable (1) Wiring board |
| Application | Milling Machine |
|---|---|
| Certification | CE |
| Communication Port | U disk / USB cable |
| Control Signal | differential signal |
| Controlled Axis Number | 3 axes |
| Display Screen | 128*64 Monochrome LCD |
| Drive System | step motor/servo motor |
| Internal Memory | 512MB |
| Is Smart Device | no |
| Model Number | CNC DSP A11S;CNC DSP A11S |
| Origin | Mainland China |
Send Us an Inquiry
Tell us your requirements — wire range, output target, voltage or customization needs — and our engineers will recommend the right machine for your line.
- Factory-direct pricing
- Reply within 24 hours
- OEM / ODM supported
- 12-month warranty
